Learning Outcomes

Understanding Manufacturing

Fundamental Approaches of Manufacturing

Manufacturing Processes - Specific Advantages and Limitations

Materials and Manufacturing Processes

Classification of Manufacturing Processes

Lesson Summary

In this module, you will learn about the fundamental approaches to manufacturing, as well as the advantages and limitations of manufacturing processes. You will also discuss the material and manufacturing processes and the classification of manufacturing processes.

Selection of Manufacturing Processes

Applications of Manufacturing Processes

Effects of Manufacturing Processes on Mechanical Properties

Break-Even Analysis in Manufacturing Processes

In this module, you will learn about the selection and applications of manufacturing processes. You will also learn about the effects of these properties on the mechanical properties of materials as well as break-even analysis in manufacturing processes.

Casting - Introduction and Suitability

Steps of Casting Processes

Casting - Terminology

The Pattern Allowances I

The Pattern Allowances II

In this module, you will be introduced to the different terminologies of the casting process. You will also discuss the steps involved in casting processes, pattern allowances, and the process of sand molding.

Sand Moulding l

Sand Moulding II

Core and Core Prints

The Gating System

Yield and Riser Design

The Riser Design

In this module, you will learn about the factors that affect the properties of the moulding sand and the Gating System. You will also study the Core, Core Prints of casting, as well as the Yield and Riser Design.

Cleaning of Castings

Casting Defects and Prevention

Shell Mould Casting

Investment and Permanent Mould Casting

In this module, you will learn about the process of cleaning castings. You will gain an understanding of the casting defect and their preventions. You will also learn about shell mould casting as well as investment and permanent mould casting.

Hot and Cold Working

Rolling

Forging

Extrusion

Wire Drawing

Press

In this module, you will learn about the different types of metalworking processes that occur in manufacturing. You will discuss various types of presses used in metalworking processes and the types of forging processes. You will also study the torque and power consumption required in the rolling process as well as extrusion and wire drawing processes.

Shearing

Shearing Based Operations

Sheet Metal Operations

Dies and Die Sets

In this module, you learn about different shearing operations in sheet metal processes. You will also study the mechanical properties desired in dies and punches that make them perform at an optimal level.

First Assessment

You must score 80% or more to pass this assessment.

Machining

Mechanism of Metal Cutting

Chip Formation

Types of Chips and Power Consumption

Heat Generation

Tool Failure and Tool Life

In this module, you will learn about the mechanism of metal cutting and the process of chip formation. This includes the different types of chips in the material removal process as well as the different sources of heat generation during the metal cutting process. You will also learn about power consumption, tool failure and tool life.

Tool Materials

Cutting Fluids

Introduction to Grinding

Grinding Wheel

Grinding Wheel II

Grinding Operations

In this module, you will further be introduced to different material removal processes. You will discuss the various options of tool materials available. You will learn about the types and functions of cutting fluids. You will also learn about the grinding process and the different mechanisms involved.

Joining of Metals - Fundamentals I

Joining of Metals: Fundamentals II

Welding Processes

Brazing, Soldering, and Weldability

Weldability and Welding Defects

In this module, you will learn the fundamentals of joining metals and welding processes. You will also learn about the processes of brazing and soldering, as well as determining the weldability of metals/materials.

Introduction to Heat Treatment

Heat Treatment - Mechanisms and Principles

Heat Treatment Processes

Normalizing and Hardening

Tempering

In this module, you will learn about the mechanisms and principles of heat treatment. You will also learn about heat treatment processes, the annealing process, and different applications of tempering.

Introduction to Improving Surface Properties

Surface Modification Processes

Changing Chemical Composition

Coating

In this module, you will learn about improving surface properties through surface modification processes. You will also discuss processes for changing the chemical composition and coating processes for improving surface properties.

Second Assessment

Advanced Diploma in Fundamentals of Manufacturing Systems - Course Assessment

Obtain advanced diploma and learn about fundamentals of manufacturing processes from this online course.

Advanced Diploma in Fundamentals of Manufacturing Processes

This free online diploma course on the Fundamentals of Manufacturing Processes offers a comprehensive guide to the different processes, applications, and terminologies of manufacturing processes. Learn about the effects of manufacturing processes on the mechanical properties of materials, as well as the advantages and limitations of manufacturing processes. So, begin this course today and enhance your knowledge of manufacturing processes.

There are multiple types of processes that manufacturers can use to aid in the manufacturing of a product. Advanced Diploma in Fundamentals of Manufacturing Processes is a free online course that will teach you about the importance of new and innovative technologies that increase the productivity of a product. This course illustrates the fundamentals of manufacturing processes, materials, and procedures in developing a product that provides the desired service or experience.
This course begins by introducing you to the main purpose of manufacturing goods. You will learn about the different processes needed to achieve the desired features of a product. Furthermore, you will learn about the different types of metalworking processes as well as material removal processes. You will also learn about the processes for changing the chemical composition and coating processes.
This free online course will give you an in-depth understanding of the fundamentals of manufacturing processes. You will learn the importance of achieving the desired size, shape, and properties of a product. This course will be of great interest to individuals with an interest in the automobile industry and the aviation industry. Start this free course today and improve your knowledge of fundamentals of manufacturing processes.

2000+ Free Developer and IT Certifications

Duolingo is Shutting Down Its Only Classroom Tool

11 Best TypeScript Courses for 2025

University of Sheffield Ends 11-Year Partnership with FutureLearn

DeepLearning.AI to Cross $100M in Sales on Coursera

Learn English as a Second Language (ESL) with Hundreds of Courses & Sites

7 Best Low-Code/No-Code Development Courses for Beginners in 2025

6 Best Cyber Threat Intelligence (CTI) Courses in 2025

Learn Something New: 100 Most Popular Courses For December

10 Best Organic Chemistry Courses for 2025

Udemy vs Coursera: Comparing Online Learning Giants that IPO’d in 2021

Udacity’s 2021: Year in Review

Open edX Conference 2024: Program & Speakers

BloomTech’s Downfall: A Long Time Coming

White-Labeling in Online Education: Whose Credential Is It Anyway?

30+ Holiday Discounts & Online Learning Deals

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.