Learning Outcomes

Introduction to Marine Digital Electronics and Logic Gates

Digital Logic Circuits - Latches and Flip Flops

Algorithmic State Machine

Fundamental Mode Sequential Circuits

Shift Registers

Lesson Summary

In this module, you will learn about digital electronics in different operating circuits related to marine electronics. You will discuss important concepts such as logic gates, digital logic circuits, flip flops, algorithmic state machine, fundamental mode sequential circuits, and shift registers.

Adders

Subtractors

Encoder and Decoder

Multiplexer and Demultiplexer

Read-Only Memory (ROM)

In this module, you will learn about combinational circuits as a part of digital systems relevant to electricity and marine electronics. You will also learn about the operations and workings of adders, subtractors, encoders, decoders, MUX, and DEMUX.

Modulation

Demodulation

AM/FM Transmitter and Receiver

Radars

In this module, you will learn about communications systems, their application in sending and receiving information on board ships alongside their different components. You will also learn about distinguishing between modulation and demodulation.

Electronic Circuits in Maritime Communication Systems - Course Assessment

Learn about the applications of electronic circuits in maritime communication systems from this free online course.

Electronic Circuits in Maritime Communication Systems

This course delves into the electronic circuits found in maritime communication systems. It offers an in-depth guide to the mechanisms, principles and applications of these communication systems. Learn about logic gates, registers and algorithmic state machines for digital circuits, as well as adders and encoders for combinational circuits. So why are you waiting? Start this course today and begin your next learning journey!

We observe many electronic applications used in all sizes and examples of watercraft. Maritime communication systems range from popular technologies such as autopilot and or self-steering systems, GPS, fuel monitoring and management and marine VHF radio, among many others. This course on electronic circuits in maritime communication systems teaches you valuable concepts related to marine communication systems, including the integral roles the electronic logic family plays in the principles and applications of all electronic circuits used onboard ships and vessels. We illustrate these complex elements of electronic circuits to assist you with understanding the application of multiplexers and demultiplexers. We also discuss the rules around combinational circuits and logic gates. This phenomenon of regulating electrons has led to some of the most significant innovations in the last century, including computers, televisions, electric cars, video games, smartphones and so on. This science is also essential for developing industries such as telecommunications, banking, logistics and shipping. Electronics has helped relevant players in maritime, like marine engineers, and perform various activities related to designing, constructing, testing and maintaining marine vessels. Electronics also drive the maintenance of offshore platforms for the docking of marine vessels. 
The science of electricity is governed by many important elements covered in this course, including circuit types and the features that make them up. On the other hand, electronics technology is a function of many developments in maritime operations helping vessel and crew safety while encouraging naval efficiency. Circuits, a crucial component of energy transmission required by marine electronic communication systems, are also analysed. The course provides a basic understanding of maritime communication systems and covers digital electronic circuit elements, including logic gates, algorithmic state machines, shift registers, etc. Adders, subtractors, encoders, decoders and ROM are also addressed as combinational circuits. Discover relevant aspects of maritime communication systems such as modulation and demodulation and the classification of radars and their applications. Identify different communication systems and distinguish each one based on their workings and uses. The different types of latches and flip-flops are also well explained. Concepts related to other communication systems we have ashore, including AM and FM signal transmission, are dealt with in detail.
This course aims to equip you with an outlook of electronics consisting of different types of circuits relevant to maritime communication systems. These circuits involve fundamental mode sequential circuits applied by mariners and people connected to marine life. This course introduces you to digital circuits in marine electronics and the basic principles of how they work. Investigate different electric circuits, observing how various factors affect them, especially with aspects of communication. As the world expands and products need to be distributed to all corners of the earth, maritime transport systems are in dire need. The knowledge of electronic circuits in naval communication systems is thus becoming more and more relevant. This course will be of significant interest to students, researchers, marine engineers and anyone seeking to learn about marine electronics and its different workings. Improve your understanding of electric circuits and components related to marine communication systems by registering today!

[2025] 2000+ Free SWAYAM + NPTEL Courses

Duolingo Q1 2026: Toward 100M DAUs with Record Engagement and Slower Paid Growth

Duolingo’s Q4 2025: Record Revenue, Record Stock Drop, One Massive Buyback

Black Friday 2024: 50+ Online Learning Deals

9 Best Cinema 4D Courses for 2025: Navigating the 3D Universe

Open edX Conference 2024: Program & Speakers

Chasing 100M Daily Users, Duolingo Reconsiders Ads, Paying Influencers, and Its Most Expensive Plan

Udemy Earns More, Pays Instructors Less: Class Central Exclusive

From Zero to Cybersecurity Analyst: How Google’s Certificate Can Launch Your Career

Udemy Appoints McKinsey Veteran as CEO Amid Growth Challenges

7 Best Climate Change Courses for 2025: Exploring the Science

Four Months After Unveiling Ambitious AI Roadmap, Udemy’s Co-founder CTO is Out

AI Prompting with Google: From Beginner to Certified

OpenAI Academy Review: A Close Look at ChatGPT 101 for Small Businesses

Scaler Academy’s Big Lie: How India’s EdTech Darling Inflated Revenue by 15x

9 Best TensorFlow Courses for 2025

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.